Tipper Trailers
View The Trailer Gallery »
Supporting Files
STANDARD EQUIPMENT*
Body length - 45'
Body width - 95½"
100-cubic-yard capacity
Side height - 100"
Side sheet thickness - .165"
Side vertical posts - extruded
6061 T6 aluminum. 4½" wide at face widening to 6 ¾ " at base.
Wall thickness - 3/16". Side post spacing - 32" centered.
Top rail - 6061 T6 extruded aluminum.
9" high x ¼" thick face and 5/16" top.
Bottom rail - 6061 T6 aluminum.
4 ½" wide x ¼" thick with 5/16" in corners.
Rear corner posts - single 9" wide x 3/8" thick rear face
Cross members - 4" I-beams on 12" centers
Bulkhead sheet - .175" aluminum sheet
Extruded bulkhead corners
Bulkhead ladder - driver's side
Dirt shedders - smooth aluminum
Flush front fenders with short rubber flaps
Fifth wheel plate - 60" wide x ¼" high-tensile steel
Lights - 3 per side plus center turn signal
Full flaps on the rear
Tailgate: side swing, hinge curbside.
Tailgate latch - air-operated: air open/spring close for positive lock
Sheet thickness - .175"
Suspension - 4-spring, 50,000-lb. capacity
Axles - 5' round "TP" type with 5/8" thick wall and same size inner
and outer bearings. 25,000-lb. capacity.
Wheels - 10-hole steel disc
Hubs - 10-stud steel with cast outboard drums
Tires - 11R24.5 steel belted radials
Tire carrier - single tire
Landing gear - Two-speed load bearing
* All specifications are subject to change without notice.